Whenever a multinational sporting goods company launches a new product everyone is up to get some exciting news full of surprises.
The TaylorMade has come up with some of the very exciting features with the launch of its new product as TaylorMade M3. The thing which turns the head on towards this product is its twisthead technology.
The curvature of the face is the main reason behind the invention of the newer technology with a much broader look and unique finish. The wood features that resemble the local gear shift of the new model. The TaylorMade’s back team has been working on the model for the last 4 or 5 years looking into the matter to get the right bar behind the build-up technology. It has been noticed that according to the team that most players have been hitting the ball either low in the face or higher up the toe if it’s not been from the middle section.
The picture dictates the launch event hit back in the date, but the reality shows that the change is hardly noticeable providing impactful results with negligible changes. The crown of the club is very much glossy and superb structured.
The Twist Face:
The face is closed and spin is reduced to half when the ball is hit from the high toe section. This state made the twisted face wider to the golfer’s reach. The twist face with this toe end fall increases the spin and helps to straighten up the ball height to a greater pace. In the case of the heel shot the whole so the scenario is then reversed.
The M3 is the perfect driver for these types of unique advantages.
Look and designing:
There is much difference in the shape and design of the crown of the M1 and now newly designed M3 driver. The silver color in approached with then used white color tip boundary.
The TaylorMade has used the silver linings and its related design post this product also with the introduction of the SLDR which also uses the color on the crown.
The carbon involved with the product is of 5layer boundary.
The Mitsubishi Tensei shaft have been accommodated with the M3 driver which is quite a unique and different upfront. In reverse of this M1 driver used to adjust with the project X hzrdus yellow.
The hosel of the TaylorMade is adjustable up to +/- 2, with changing shafts option.
The single track is replaced with the double-stranded track with stock positioning. Weight is leveled from one side of the head. The movable weights help to achieve a better result with variation in the hosel arrangement. The TaylorMade demonstrates the loft up to 9.5 degrees of the spin.
The weight is adjusted one in the front and other been on the back of the arrangement.
The tightened Y track weight results in the final position of the driver. The spin reducing M440cc driver is also available in the market which sources the angle from 9 degrees to 10 degrees.
The horizontal MOI of 5000 of the head is a high angle from today’s scoring standards. If you like to accurate your results then TaylorMade M3 twist face is the best product available for you in the market.
How much is a TaylorMade m3 driver?
Well, the price varies in the Taylormade M3 driver. The variation in the price depends upon various factors like the hand orientation, shaft material, stiff and loft degrees. The left-handed Drivers are usually costlier than the right-handed ones. While the drivers made from white graphite are more expensive than the blue and red graphite ones. The loft degree also varies the prices in the M2 Drivers. Overall the Taylormade M3 drivers fall between 300$ to 500$ range.
How do I set up my TaylorMade m3 driver?
Tuning and adjusting an M3 is an easy yet very important activity. It should be done with Taylormade torque wrench only. You should initially loosen the screw with the help of a wrench in the middle of every weight. While keeping ears for a click noise you must put the weight on the correct location while tightening the screw.
What is the lie angle?
The lie angle can be defined as the angle between the shaft and the ground line when the club is estimated in an ordinary playing position with the focal point of the sole contacting the ground line.
What year did the TaylorMade m3 driver come out?
The Taylormade m3 driver which revolutionized golfing altogether was launched on 16 February 2018 in the UK. This unique product was made keeping in mind every problem that the previous drivers had. Since its launch, it has been popular with the golfers.
How do I adjust my TaylorMade m3 driver?
In order to adjust the Taylormade m3 driver loft sleeve, you need to loosen the screw in the heel until the clubhead release from the shaft. Align the desired loft as marked on the sleeve with the line on the back of the hosel and tighten the screw until you hear the click sound.